|
The following photo is of the new petrol
tank I have made and mounted under the passenger floor. It is fully
baffled and should hold enough fuel to compete in all the races I
intend to enter. The only work i have left to do on the fuel system
is to mount the fuel pump and pressure regulator valve. I have two
different carburettors i can use on two different manifolds. I have
a solex and a webber but I am not sure which I am going to use at
the moment.
This shows the front view of the
outfit where you can see the radiator and header tank. I have not
fitted the water pipes on this photo. The water will leave the
engine at the top of both cylinder heads and go to the top of the
forward radiator then pass through the header tank and to the
electric water pump which pumps it into the engine.
Next Page
|
